CIMCO Machine Monitoring is installed at ULTRA ENGINEERS, at Bhosari-Pune.
The reports are customized as per the requirement from ULTRA.
Watch this video
 https://www.youtube.com/watch?v=htYTHwTYPXc&feature=youtu.be

CIMCO Machine Status Monitoring at Andritz-Palwal, Near Faridabad-India

In Sept 2014, DIGITECH installed Machine Status Monitoring System on 8 CNC Machines at M/s Andritz-Palwal, Near Faridabad (India). Mr. Sanjeev Bahl - Team Leader wanted to monitor all machines, 24 X 7 basis. The machine sizes are very big & so the jobs. Andritz was not much worried about "Part-Cout" on CNC, but wanted to know, "Productive time on each Machine. From each machines, 3 signals were taken for live monitoring. Bar Code scanner was fixed on each CNC. The operator reports back the reason of down time, using the Bar Code scanner.

The above time line of 14th Nov shows the details of each machine, along with time duration. The system gives monthly report as below- No person enters any data in EXCEL sheet.

Mr. sanjeev of Andritz was satisfied with the system.
See this email :

Merging of two MDC systems from 2 different locations to one location at Manweir-Ras Laffan-Qatar

Manweir Salwa plant had CIMCO-MDC installed about a year back. Manweir Ras Laffan also had CIMCO-MDC. Now, Manweir shifted all the machine shop to Ras Laffan plant. Digitech was invited to merge two systems in to one MDC covering total 9 CNC machines. 

All machines are interfaced with wi-fi technology. In order to cover all machines, the main wi-fi access point was re-located at suitable point on the wall. Email alerts were re-configured. If any machines is stopped for more than one hour, the system sends email as below. The recipients can be decided. 

 

The reports were modified as per the requirements from the D. G. M. 
Daily, weekly & Monthly reports are generated automatically in EXCEL format, with out any manual data entry. Some of the reports during trials are as below-

The live display of productivity is now shown on a big size TV in the shop floor. 

Fanuc Robodrill & Haas VMC are being monitored by CIMCO-MDC using Wi-Fi in Thailand

This is a CNC Shop at SUS-Thailand. You can see Haas VMC. On left side there is a office cabin. Haas VMC & Fanuc Robodrill machines are connected by Wi-Fi technology to a remote desktop-PC. CIMCO Machine Monitoring Software is installed in the Desktop-PC. 

Both machines are monitored 24 X 7 basis on an unmanned computer. The CNC Operators have one Android Tablet with them. When any machine is under down time, the operator selects the reason code on the android based tablet. This is also connected to un manned PC by wi-fi. Thus machine utilization & productivity reports are generated automatically in EXCEL. Further details can be obtained by sending a request to digitechpune@gmail.com